ADTRAN 604 System Manual page 226

Section 5 DLP-15
Setting up the Total Access 6XX to use Syslog:
1. Log in to the system with maximum rights (see DLP-2, Logging in to the System). Once you have
logged into the Total Access 6XX, go to S
• : Enter the IP address of the PC where the Syslog host resides
S IP
YSLOG
•
S F
YSLOG ORMAT
or (to work with a standard UNIX Syslog server)
UNIX
•
S F
YSLOG ACILITY
Setting Up the Syslog Host:
1. On your PC, go to S
you will see L 0 through L
OCAL
specified in the Total Access 6XX. The Syslog program must be open on your PC in order for it to
record Total Access 6XX information. The Syslog files can be viewed through the Syslog window, and
they are also available under the ADTRAN Utilities Folder named L
through 7. You can also view the L
224
YSTEM
: Specify the Syslog format as either
: Specify the facility destination of log events; Options are
/P /ADTRAN U
TART ROGRAMS
7 listed on the left. This should correspond with the H
OCAL
X.
OCAL TXT
© 2004 ADTRAN, Inc.
Total Access 600 Series System Manual
C /S . Set the options as follows:
ONFIG YSLOG
(to work with ADTRAN Utilities)
ADTRAN
/S . When the Syslog window opens,
TILITIES YSLOG
OCAL
file by clicking on E L
DIT
to
L 0 L
OCAL OCAL
F
OST
X. , where X can equal 0
TXT
.
OG
61200624L1-1B
7
ACILITY