ADTRAN 604 System Manual page 108

Section 4 User Interface Guide
C (V35) > S
ONNECTION
Use these menus to configure the Protocol mapping, DE map, and FECN map for the V.35 PVC
connections.
C
ONNECTION
Network providers have the ability to provision each PVC pair with an encapsulation mode
to ensure interoperability between terminal equipment. The choices are
T
RANSLATION
protocols over Frame Relay and ATM PVCs.
C
ONNECTION
Maps Frame Relay Discard Eligible (DE) bit to the ATM Cell Loss Priority (CLP) bit. The
choices are
.
DE = 0
C
ONNECTION
Allows mapping of Frame Relay FECN (Forward Explicit Congestion Notification) bit to
ATM EFCI (Explicit Forward Congestion Indicator) bit. The choices are
FECN. The factory default setting is
MAP
C (V35) > S
ONNECTION
Use these menus to configure the DLCI mapping for the PVC from the T1 network interface to
the V.35 interface.
C
ONNECTION
Displays the DLCI Map number and is used as an index for multiple listings. The first map
entry listed is 1, the next is 2, etc. All map numbers assigned will be sequential.
C
ONNECTION
Enables FR/ATM mapping and data passing between the V.35 FRFx connection and the
ATM PVC on the network interface. If set to
configured V.35 endpoint. By default, this field is set to
the connection is configured.
C
ONNECTION
The T1 interface is
This is an identifier for the system to document the T1 network end of the logical link
between the network port and the V.35 interface.
106
> S
ETUP ETUP
(V35) > S > S
ETUP ETUP
(def). mode is most common and carries multiple upper layer
T
RANSLATION
(V35) > S > S
ETUP ETUP
, , and
DE = 0 DE = 1 C
ONVERT
(V35) > S > S
ETUP ETUP
> DLCI M
ETUP APPING
(V35) > S > DLCI M
ETUP
(V35) > S > DLCI M
ETUP
(V35) > S > S
ETUP ETUP
which represents the T1 physical and logical ports respectively.
ATM[0.0]
© 2004 ADTRAN, Inc.
Total Access 600 Series System Manual
> P M
ROTOCOL APPING
> DE M
AP
(map DE TO CLP). The factory default setting is
> FECN M
AP
.
FECN
NO MAP
> M
APPING AP
> A
APPING CTIVE
, data will not pass from the network to the
N
O
Y
ES
> I
NTERFACE
T
RANSPARENT
FECN
NO MAP
to allow data to pass as soon as
61200624L1-1B
or
and