Installation Examples; Fastening Requirements (But Not Included) - Assa Abloy SW300 Installation And Service Manual

10.3

Installation examples

1 Aluminum profile system
2 Plasterboard wall
3 Reinforced concrete wall and brick wall
4 Plasterboard wall
10.4

Fastening requirements (but not included)

Base material
Steel
Aluminum
Reinforced concrete
Wood
Brick wall
* ASSA ABLOY Entrance Systems minimum recommended requirements. Building Codes may give
different specifications.
** Thinner wall profiles (3-5 mm) must be reinforced with rivet nuts.
*** Thinner wall profiles (4-6 mm) must be reinforced with rivet nuts.
1007913-en-20.0
A Steel reinforcement or rivet nut
B Wood reinforcement
C Expansion-shell bolt (for brick wall min. M6x85,
UPAT PSEA B10/25)
Minimum requirements of wall profile*
5 mm**
6 mm***
min. 50 mm from the underside
50 mm
Expansion-shell bolt, min. M6x85, UPAT PSEA B10/25, min. 50 mm from
the underside
Issue 2021-02-04
Non combustible materi-
al in fire application
Non combustible ma-
terial in fire application
10 Pre-installation
35