Assa Abloy NORTON RIXSON 6021 Series Installation Instructions Manual

6021/6031 Series
(Push Side) Power Operator
Installation Instructions
WARNING
This product can expose you to lead which is known to
the state of California to cause cancer and birth defects or
other reproductive harm. For more information go to
www.P65warnings.ca.gov.
6021 Push Side up to 110° opening
Operator LAP
(6021LAP)
Closer Assembly
(7500LAP)
End Cap - LH
Adjusting Tube
(6001ENLH)
and Shoe
(6620-12)
Main Arm and Rod
6031 Push Side (Handed) 110° to 180° opening
All components above with 6030-1W main arm and rod
instead of 6020-1W
Tools Needed
#7 3/8
1/4-20
Ratchet
with 11/16"
10" or 12" #2 and #3
socket
(required for
6031 model)
Copyright © 2019, 2023, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9360-1027-020 Rev 5 01/23
Power Module Sub-assembly
(6001PM)
Backplate (6001BP)
Motor
(not field replaceable)
(6020-1W)
Supplied Fasteners
Safety Glasses
NOTE: Fasteners shown are for this
specific installation. (Fasteners for other
installations are included in package)
Set (Inch) Punch
Power Module Sub-assembly
Approved 2023-01-24
Pour la version francaise voir NortonRixson.com.
READ AND FOLLOW ALL INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
Power Supply
(6000SUP)
Inverter
(6000IN)
Cover
(6001COV)
Main Arm and Rod
(6030-1W)
13X
Conduit Assembly 2X
End Caps Adjusting Tube
Union Assembly & Shoe
#8-32 x 5/16" 1/4-20 x 2"
End Cap - RH
(6001ENRH)
Conduit Assembly
(6001CON)
Union Spacer
(6001US)
2X 2X
Union Spacer Union Door
#6-32 x 1/4" #4-40 x 3/8"
Backplate
#14 x 1-1/2"
1X 8X
Arm Operator LAP
1/4-20 x 1/2" 1/4-20 x 1/2"
Union
Assembly
(6001U)
2X
Backplate
1/4-20 x 1"
OR
8X
6X
Backplate
1/4-20 x 5/8"