Tools Required - Assa Abloy SW300 Installation And Service Manual

10 Pre-installation
10.5

Tools required

• Metric Allen keys 1.5; 2.5; 3; 4; 5 and 6 mm
• Torque wrench 8 Nm, 14 Nm and 50 Nm
• Allen key 1.5; 2.5 and 3 mmwith spherical tip
• Torx T10 and T20
• Tool for screw between cover and backplate
• Flatblade screwdriver (potentiometer and terminal size)
• Screwdriver (Philips size 2)
• Nut driver, 5 and 7 mm
• Tape rule
• Power drill and set of drill bits
• Center punch
• Wire stripper
• Silicone sealant
• Installation and Service Manual (this manual)
36 Issue 2021-02-04 1007913-en-20.0