Pre-Installation - Assa Abloy besam SW100 Installation And Service Manual

Low energy swing door operator
Hide thumbs Also See for besam SW100:
Table of Contents

Advertisement

Pre-installation

9
9.1
General tips/Safety concerns
9.2
Door/Operator handing
9.2.1
9.2.2
20
• For enhanced security and vandalism protection, always mount the operator
access in the interior of a building whenever possible.
• Make sure that the power is off before installing.
• Make sure that the door leaf and the wall are properly reinforced at the installation
points.
• Inspect the door hinges before installation to ensure that they are in good repair.
• Unpack the operator and make sure that all parts are delivered in accordance with
the packing note.
Operator handing
Pull
Right Hand
Left Hand
Push
Door handing (Automatic Door Industry)
Door handing is determined by standing with your back to the hinges. The side to
which the door normally opens (right or left) is the handing of the door. The diagram
below shows a right-handed door.
Issue 2007-10-11
Left hand
Right Hand
Pre-installation
1003680-US-4.0

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents