D6011/D6051 Series
Double Unit Pull Side Power Operator
Installation Instructions
WARNING
This product can expose you to lead which is known to
the state of California to cause cancer and birth defects or
other reproductive harm. For more information go to
www.P65warnings.ca.gov.
D6011 Pull Side Max 1/8" (3mm) reveal
Backplate - LH
(D6001BP-36-LH
D6001BP-38-LH
D6001BP-40-LH
D6001BP-42-LH
D6001BP-44-LH
D6001BP-46-LH
D6001BP-48-LH)
Closer Assembly
(7500LAP)
End Cap - LH
(6001ENLH)
Operator LAP
(6011LAP)
(D6001COV-36
D6001COV-38
D6001COV-40
D6001COV-42
D6051 Pull Side (Handed) 1/8" to 3" (3mm to 76mm) reveal
All components above with 7250-1(R or L)
instead of 7210-1A arm
Tools Needed
#7
1/4-20
11/16" Socket
#2 & #3
& Ratchet
Copyright © 2019, 2020, 2023, ASSA ABLOY Accessories and Door Controls Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Accessories and Door Controls Group, Inc. is prohibited.
80-9360-1029-020 Rev 6 01/23
Power Module
Conduit Assembly
Sub-assembly
(D6001CON)
(6001PM)
Inverter
Power Supply
(6000IN)
(6000SUP)
Cover
D6001COV-44
D6001COV-46
D6001COV-48)
Supplied Fasteners per Operator
Safety Glasses
NOTE: Fasteners shown are for
(Fasteners for other installations
are included in the package)
3/8
Set (Inch)
Power Module Sub-assembly
Punch
Approved 2023-01-24
Pour la version francaise voir NortonRixson.com.
READ AND FOLLOW ALL INSTRUCTIONS.
SAVE THESE INSTRUCTIONS.
Power Module
Sub-assembly
(6001PM)
Power Supply
(6000SUP)
Inverter
(6000IN)
Union Spacer
(6001US)
Union Spacer
(6001US)
Union Assembly
(D6001U)
(7250-1R/7250-1L shown)
this specific installation.
13x
Conduit Assembly
End Caps
3x
Union Assembly
Track
#8-32 x 5/16"
1/4-20 x 2"
Backplate - RH
(D6001BP-36-RH
D6001BP-38-RH
D6001BP-40-RH
D6001BP-42-RH
Operator LAP
D6001BP-44-RH
(6011LAP)
D6001BP-46-RH
D6001BP-48-RH)
Cover
(D6001COV-36
D6001COV-44
D6001COV-38
D6001COV-46
D6001COV-40
D6001COV-48)
D6001COV-42
Double Egress Arm
2x
2x
Union Spacer
Union Door
#6-32 x 1/4"
#4-40 x 3/8"
1x
8x
Arm
Operator LAP
1/4-20 x 1/2"
1/4-20 x 1/2"
Closer Assembly
(7500LAP)
End Cap - RH
(6001ENRH)
Arm Assembly
(7210-1A) x2
Track Assembly
(7200-1T) x2
2x
Backplate
1/4-20 x 1"
OR
7x
Backplate
#14 x 1-1/2"
5x
Backplate
1/4-20 x 5/8"