Arm Systems; Pushing Installation With Push-Arm - Assa Abloy SW300 Installation And Service Manual

8

Arm systems

The installation process of arm systems is the same for Fire door installations, Basic installations
and Inverse installations.
8.1

Pushing installation with PUSH-arm

This arm system is delivered with drive arm, telescopic part and door fitting. It is used if the oper-
ator is installed on the wall on the opposite side of the door swing, and approved for fire door ap-
plication for A up to 300 mm.
Art. No.: 1007965BK/SI
Extension
345 mm extension
Art. No.: 173005BK/SI
230 mm extension
Art. No.: 173004BK/SI
Joint part
Art. No.: 173191
None (Standard arm)
Extension L=345 mm
Extension L=230 mm + joint part
Extension L=345mm + 230 mm + joint part
1007913-en-20.0
Frame depth
hinge
150 mm
A = reveal
0-22 mm
22-137 mm
137-252 mm
252-367 mm
Issue 2021-02-04
8 Arm systems
120 mm
25