Installing The Lcd Screen; Figure 43: Remove The Mounting Block; Figure 44: Slightly Loosen The Nut On The Mounting Block; Figure 45: Attach The Mounting Block To The Rear Of The Lcd Panel - Gamatronic POWER+ PREMIUM Installation Manual

5. I
NSTALLING THE
When installed, the LCD screen is located in the front top of the UPS (see Figure 1).
To protect the LCD screen from damage, it does not arrive installed.
1. The LCD screen comes in its own box. Open the box, remove the screen from the box, and remove
the mounting apparatus
2. Loosen the nut on the rear of the mounting block (without removing the nut) so that the nut can get
into the track on the rear of the LCD screen.
3. Attach the mounting block to the LCD screen by sliding the nut up the track on the rear of the screen.
Then tighten the mounting block screw to prevent the mounting block from moving.

Figure 45: Attach the mounting block to the rear of the LCD panel

42
G
AMATRONIC
LCD

Figure 43: Remove the mounting block

Figure 44: Slightly loosen the nut on the mounting block

E I L
LECTRONIC NDUSTRIES TD
SCREEN
Power + PREMIUM, Installation Guide, rel. 1.7
.