Table of Contents
Advertisement
1.
From the system main menu, choose "Operation > Turn on/off > Modules off".
.
2
On the screen, choose the module to be replaced. The modules are numbered from bottom to top.
The outline of the module you choose becomes highlighted.
.
3
Press the "Complete Shutdown" button.
.
4
To verify that the module has been shut down, navigate to the module status screen
("Main screen > Status > Modules"), press on the icon of the module you just shut down, and verify
that the status is "OFF" for these four items: PFC, Inverter, Input relay, Output relay.
.
5
Unscrew the two screws that secure the module – one on the left side, one on the right side (see
34
G
E
AMATRONIC
LECTRONIC
Figure 33: Turning off a module
Figure 34: "Status > Modules" screen
I
L
.
NDUSTRIES
TD
Power + PREMIUM, Installation Guide, rel. 1.7
Advertisement
Table of Contents
