Remote Monitoring Panel ( Option ); Figure 49: The Remote Monitoring Panel; Table 4: Leds On The Remote Monitoring Panel - Gamatronic POWER+ PREMIUM Installation Manual

8. R
EMOTE MONITORING PANEL
The remote monitoring panel (Figure 49) enables you to monitor the UPS from a distance. It can be located
a maximum distance of 50 m from the UPS. The remote monitoring is connected directly to the UPS with a
4-wire cable via the D9-type Alarm connector on the rear of the controller (Figure 50). It shows you the
current status of the LEDs on the UPS.
The remote monitoring panel has only one button – the "Alarm Off" button, which enables you to temporarily
silence the audible alarm.
LED
BYPASS
B/P
OVERLOAD
BATTERY
CHARGER
INVERTER
INV
LOAD LEVEL
UPS ON
ALARM OFF
Power + PREMIUM, Installation Guide, rel. 1.7
G
AMATRONIC

Figure 49: The remote monitoring panel

Table 4: LEDs on the remote monitoring panel

C
INDICATOR OLOR
green
red
red
red
red
green
green
red
green
red
green
green
red
green
red
E I L
LECTRONIC NDUSTRIES TD
(
OPTION
M
EANING
Bypass input is normal
Bypass fault
The load is on the bypass voltage
Overload, load moved to bypass
Battery fault
Battery normal
Input voltage is OK
Input voltage not OK
Inverter is operating normally
Inverter is faulty
The load is on the inverter
Load level normal
Excessive load
UPS is operating
The audible alarm has been muted
.
)
47