Choosing And Using Brushes; Disposal - COMAC Innova Comfort Use And Maintenance Manual

POLYPROPYLENE BRUSH (PPL)
Used on all types of floors. Good resistance to wear and tear, and hot water (no greater than 50°C.). PPL is non-hygroscopic and therefore retains
its characteristics even when working in wet conditions.
ABRASIVE BRUSH
The bristles of this type of brush are charged with highly aggressive abrasives. It is used to clean very dirty floors. To avoid floor damage, work
only with the pressure strictly necessary.
BRISTLE THICKNESS
Thicker bristles are more rigid and are therefore used on smooth floors or floors with small joints.
On uneven floors or those with deep joints, it is advisable to use softer bristles which can enter the gaps more easily.
Remember that when the bristles are worn and therefore too short, they will become rigid and are no longer able to penetrate and clean deep
down. In this case, like with over-large bristles, the brush tends to jump.
PAD HOLDER
The pad holder is recommended for cleaning shiny surfaces.
There are two types of pad holder:
1. The traditional pad holder is fitted with a series of anchor points that allow the abrasive floor pad to be held and dragged while working.
2. the CENTRE LOCK type pad holder not only has anchor points, but also a snap-type central locking system in plastic that allows the abrasive
floor pad to be perfectly centred and held without any risk of it becoming detached. This type of pad holder is recommended above all for
machines with more than one brush, where the centring of the abrasive discs is difficult.
RED PAD
Suitable for frequent use on relatively clean floors. Even cleans without water, and polishes by removing marks.
GREEN PAD
Suitable for removing surface layers of wax and for preparing the flooring for subsequent treatments. For wet use.
BLACK PAD
Suitable for wet scraping heavy layers of wax. Removes the old finish, and eliminates burrs in concrete.
NO. OF
MACHINE CODE
BRUSH-
ES
2 427715
2 427716
INNOVA
2 427717
COMFORT 75B
2 427719
2 427718
2 430696
2 430697
INNOVA
2 430698
COMFORT 85B
2 430699
2 431122
Dispose of the machine in accordance with the waste disposal regulations in force in the country in which the machine is
being used.

CHOOSING AND USING BRUSHES

Ø BRIS-
TYPE OF
BRISTLES TLES
PPL 0,3 DISC BRUSH Df=380mm De=390mm (LIGHT BLUE)
PPL 0.6 DISC BRUSH Df=380mm De=390mm (WHITE)
PPL 0.9 DISC BRUSH Df=380mm De=390mm (BLACK)
ABRASIVE 1 DISC BRUSH Df=380mm De=390mm (GREY)
- - PAD HOLDER Df=380mm (WITH CENTER LOCK)
PPL 0,3 DISC BRUSH Df=410mm De=430mm (LIGHT BLUE)
PPL 0.6 DISC BRUSH Df=410mm De=430mm (WHITE)
PPL 0.9 DISC BRUSH Df=410mm De=430mm (BLACK)
ABRASIVE 1 DISC BRUSH Df=410mm De=430mm (GREY)
- - PAD HOLDER Df=410mm (WITH CENTER LOCK)

DISPOSAL

NOTES
37