Table of Contents
Advertisement
N.B. : Each time the button (20) is pressed, the speed level of the machine's movement is increased, once the maximum level has been
reached, the speed will start again from the first level. Pressing the button subsequently changes the movement speed of the machine,
there are three selectable levels (50% - 75% - 100%).
N.B. : the reverse speed is lower than the forward speed to comply with current health and safety standards.
EXTRA-PRESSURE FUNCTION ON THE BRUSHES
The function that exerts extra pressure on the brushes is activated via the pedal (22) near the operator's seat (Fig.17).
N.B. : In manual versions, the activation of the extra-pressure function is indicated by the illumination of the green indicator light (18) on
the control panel (Fig.14).
N.B. : In automatic versions, the activation of the extra-pressure function is indicated by the weight symbol superimposed on the brush
symbol on the control panel display (Fig.18).
N.B.: The extra-pressure function can only be activated when the brush head body is in contact with the ground.
WARNING: If the drive pedal is released when working with the extra-pressure function activated, the brush head body will not return to the
rest position, in order to prevent serious damage to the machine.
ALARM SCREEN (automatic versions)
If an alarm is triggered on automatic versions, the control panel display will show the alarm screen (Fig. 19); the screen will remain visible until the
error has been resolved.
N.B. : The first row of the alarm screen shows the error code (23) (Fig.19), the second row shows the origin of the error (24), and the third
row give a brief description of the type of error (25).
When an error occurs, do as follows:
1. Stop the machine immediately.
2. If the error persists, switch off the machine, wait for at least ten seconds and switch on the machine.
3. If the error persists contact the nearest service centre.
EMERGENCY BUTTON (automatic versions)
If there are any problems while working, press the emergency button (26) on the control panel (Fig.20). This function interrupts all functions
active at that moment, in this way both the brush head body and the squeegee body will rise from the floor and automatically switch off with the
expected delays.
N.B. : As soon as the emergency button (26) is pressed, the relative symbol appears on the control display (Fig. 21).
Once you have switched off and stopped the machine, and solved the problem, proceed as follows to resume the work task:
1. Move the battery disconnect switch (26) to the rest position; turn the switch as indicated by the arrows printed on it.
2. Turn the main machine switch to "", turn the key a quarter turn clockwise.
WORKING LIGHTS - COURTESY LIGHTS (automatic versions)
The default machine has two sidelights at the front of the nose that are activated when the machine is turned on.
Press button (27) on the steering column (Fig.22) to activate the dipped headlights on the machine; press the button again to deactivate them.
Press button (28) on the steering column (Fig.22) to activate the courtesy lights on the machine; press the button again to deactivate them.
28
Hide quick links:
Advertisement
Table of Contents
