Overflow Device - COMAC Innova Comfort Use And Maintenance Manual

A. Transfer
B. Drying
C. Scrubbing with drying
D. Scrubbing without drying
5. Make sure the detergent solution tap is completely open. If this is not the case, shift the knob (4) on the right-hand side of the steering column
downwards (Fig.6).
6. Press the drive pedal (5) (Fig.7) to begin moving the machine.
N.B.: Once the drive pedal is pressed, the brush head body and the squeegee body will begin to descend into their working positions.
N.B.: Once the brush head body and the squeegee body have reached their working positions, the relative motors will enter into function,
and the solenoid valve will dispense the detergent solution.
N.B.: During the first few metres, check that the amount of detergent solution coming out is suitable for the task in hand. If it isn't, adjust it
after reading the section "REGULATING THE DETERGENT SOLUTION" on page 26.
7. The machine will now begin to work with full efficiency until the battery is flat or until the detergent solution has finished.

OVERFLOW DEVICE

The machine is equipped with a mechanical device (float) under the recovery tank lid that, when the recovery tank is full, shuts off the air to
the suction motor intake to protect it; the sound of the suction motor will then be deeper. To empty the recovery tank, see "DRAINING THE
RECOVERY TANK" on page 31.
22