Introduction - Dataman -848PRO2 User Manual

Introduction

DATAMAN-848PRO2 is our extremely fast universal 8x 48-pindriver Stand-Alone
concurrent multiprogramming system designed for high volume production
programming with minimal operator effort and training. The devices are programmed at
near theoretical maximum programming speed.
Block scheme of DATAMAN-848PRO2
external display
site 1
DATAMAN-848PRO2 consists of eight independent, isolated, universal programming
modules based on the DATAMAN-48PRO2 programming hardware. The eight
individual DATAMAN-848PRO2
programming mode). Each programming module starts programming the moment the
chip is detected to be inserted into the socket correctly - independently of the status of
other programming modules. This results in seven programming modules working while
you replace the programmed chip in the eighth.
A graphical control unit with touch screen provides basic control and easy monitoring of
the programming flow.
Modular construction of hardware - the programming modules work independently – this
allows for continuing operation should a part of the circuit become inoperable. It also
makes service quick and easy.
Hands-free operation: asynchronous and concurrent operation allows a chip to begin
programming immediately upon insertion. The operator merely removes the finished
chip and inserts a new chip. Operator training is therefore minimized.
DATAMAN-848PRO2 supports all kinds and types of silicon technology found in todays
and tomorrows programmable devices, without requiring family specific modules. You
keyboard
mouse
optional
site 2 site 3
Windows XP Embedded
driven
high performance PC
site 4 site 5
sockets can
4
graphics control unit
with touch screen
site 6 site 7
run asynchronously
site 8
(concurrent