Dataman -848PRO2 User Manual page 44

recovery" chapter. The second volume is "System" (D:), and contains the Windows
XP Embedded operating system.
Warning: Do not delete, change files or perform any writes to the "Recovery" or
"System" disk volumes.
The third volume is named "Data" (E:). This volume contains the Programmers control
software, Projects, Logs, Updates and Temp directories.
The directory Programmer is where the main control software is installed. In the Logs
directory the log files from operations with devices are saved. When the OS update files
are available they should be saved to the Updates directory. Your project files should
be in the Projects directory. Exact update steps will be distributed along with the
operating system updates.
For programmer reliability the operating system is configured with write filters on the
"Recovery" and "System" disks. As a side effect of these filters any configuration
changes to the operating system will be lost after a restart or shutdown of the
programmer.
Operating system recovery
The Recovery OS performs a reset of the programmers operating system to a state as
it was shipped from Dataman.
Before initiating the system recovery connect a monitor to the programmer and report
what you see to the Dataman support team.
To perform the operating system recovery you must have a keyboard, mouse and
display connected to the programmer. Turn on the programmer, the BIOS screen will
show:
After this screen Windows will show the following:
44