Table of Contents
Advertisement
Technical specification
Specification
system)
• 8x universal programming modules (8x 48-pin DIL ZIF sockets and 8x ISP connectors)
• operation result LEDs, LED power
• line power input 100-240VAC/60W max.
• banana jack for ESD wrist strap connection
• banana jack for connection to ground
Specification (PC system inside the programmer)
• Microsoft Windows XP Embedded operation system
• PC Intel Core 2 Quad 2.66 GHz
• 2 GB RAM
• 320 GB HDD
SPECIFICATION (valid for each programming module)
HARDWARE
Base unit, DACs
• USB 2.0 high-speed compatible port, up to 480 Mbit/s transfer rate
• on-board intelligence: powerful microprocessor and FPGA based state machine
• three D/A converters for VCCP, VPP1, and VPP2, controllable rise and fall time
• VCCP range 0..8V/1A
• VPP1, VPP2 range 0..26V/1A
• autocalibration/selftest
• selftest capability
Socket, pindriver
• 48-pin DIL ZIF (Zero Insertion Force) sockets accept both 300/600 mil devices up to
48-pins
• pindrivers: 48 universal
• VCCP / VPP1 / VPP2 can be connected to each pin
• perfect ground for each pin
• FPGA based TTL driver provides H, L, CLK, pull-up, pull-down on all pindriver pins
• analog pindriver output level selectable from 1.8 V up to 26V
• current limitation, overcurrent shutdown, power failure shutdown
• ESD protection on each pin of the socket (IEC1000-4-2: 15kV air, 8kV contact)
• continuity test: each pin is tested before every programming operation
ISP connector
• 20-pin male type with miss insertion lock
• 6 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable from 1.8V
up to 5V to handle all (low-voltage) devices.
(DATAMAN-848PRO2
multiprogramming
11
Advertisement
Table of Contents
