Dataman -848PRO2 User Manual page 37

The next function of the statistics is Count down. Count down allows checking of the
number of device operations and then the number of devices on which device
operations have to be performed. After each successful device operation the value of
the count down counter is decremented. Count down has a user defined start number of
devices to process. When the count down value reaches zero, it means the specified
number of devices is complete and a user message about the complete count down will
be displayed.
The check box Enable Count down sets the Count down activity (enable or disable).
The edit box following the Enable Count down check box defines the initial value used
for the count down counter
.
The actual statistics values are displaying in the main window of the control program in
the Statistics panel.
Statistics panel contains:
three statistics values
two Count down information values
Meaning of the values is as follows:
Good - number of operations which where successfully completed
Fail - number of operations which where not successfully completed
Total - number of all operations
Ctdn - informs of the Count down activity (En (enabled) or Disabled)
Remains - informs of the remaining number of device operations to do
Notes: When a project file is loaded all statistics values are set to zero and Ctdn is set
to Disabled.
For multiprogramming with the Pg4uwMC software the statistics information is also
saved to the Job Summary report.
Options / View Log...
This command displays the contents of the current Log window. At the top right corner
is the [x] button which is used for closing the Log window and displaying the main
screen.
Options / Protected mode...
Protected mode is a special mode in which to run the program. When the program is in
Protected mode there are certain program operations and commands that are
Good, Fail, Total.
Ctdn status and value.
37