Dataman -848PRO2 User Manual page 5

can be sure that new device support requires just the software to be updated and (if
necessary) a simple package converter (programming adapter), therefore the ownership
costs are minimized.
Using the built-in in-circuit serial programming (ISP) connector, the programmer is able
to program ISP capable devices in circuit.
DATAMAN-848PRO2 provides very competitive pricing coupled with excellent
hardware design for reliable programming. It is the best "value for money" programmer
in its class.
DATAMAN-848PRO2 provides very fast programming times due to high-speed FPGA
driven hardware and execution of time-critical routines taken care of inside the
programmer. At the very least, programming speeds are faster than our competitors in
this category and for many chips it is in fact much faster than our competitors. As a
result, when used in production this programmer waits for an operator and not the other
way round.
DATAMAN-848PRO2 provides two banana jacks, one for ESD wrist strap connection
for easy-to-implement ESD protection and the second one for connection of the
programmer to ground.
FPGA based totally reconfigurable 48 powerful TTL pindrivers provide
H/L/pull_up/pull_down and read capability for each pin. Advanced pindrivers incorporate
high-quality high-speed circuitry to deliver signals without overshoot or ground bounce
for all supported devices. Pin drivers operate down to 1.8V so you'll be ready to
program the full range of todays and tomorrow's advanced low-voltage devices.
DATAMAN-848PRO2 performs on each programming module, a device insertion test
(wrong or backwards position) and contact check (poor contact pin-to-socket) before it
programs each device. These capabilities supported by overcurrent protection and
signature-byte check help prevent chip damage due to operator error.
DATAMAN-848PRO2 has a selftest capability which allows the diagnostic part of the
software to thoroughly check the health of each programming module.
DATAMAN-848PRO2 has a built-in protection circuit for eliminating damage to the
programmer and/or programmed device due to environment or operator failure. All ZIF
socket pins of the DATAMAN-848PRO2 programmer are protected against ESD up to
15kV.
DATAMAN-848PRO2 performs programming verification at the marginal levels of
supply voltage which obviously improves programming yield and guarantees long data
retention.
Various socket converters are available to handle devices in PLCC, SOIC, PSOP,
SSOP, TSOP, TSSOP, TQFP, QFN (MLF), SDIP, BGA and other packages.
It is important to remember that in most cases new devices will require only a software
update because the DATAMAN-848PRO2 is based on the truly universal (DATAMAN-
48PRO2) programmer. With our prompt service you can have new devices added to the
current list within a matter of days!
5