Introduction; Features - Dataman 48UXP User Manual

Introduction

The Dataman-48UXP is a high performance intelligent PC-based
universal programmer that works through your PC's parallel port. It
features 48-pin ZIF sockets, supports all kind of programmer chip in
the market which include CPLD, EPROM, EEPOM, Serial
EEPROM, Flash memory and MCU, extremely high throughput, 5V
and 3V chip support in both Vcc and I/O, lower voltage chip (for
example 1.8V Vcc and I/O support) also possible through special
adapter, device insertion and continuity checks, all within a
PC-based design. Device updates are disseminated through software,
giving our customers quicker and more flexible access to new chip
support.

Features

Universal adapter below 48 pin
The Dataman-48UXP is designed to meet you future needs in high
density Flash chips. Using the resources of your PC, it supports 32K
bit up to over G bit memory chips without upgrading its hardware.
The Dataman-48UXP also has a universal adapter that
accommodates 48-pin TSOP, 44-pin PLCC, 40-pin TSOP, and
32-pin TSOP that support all the chip in same adapter which
eliminates the need to buy multiple adapters and saves you money.
Unbeatable speed
The Dataman-48UXP's on-board intelligence reduces system
overhead to a minimum. It can program Flash chips within 2.5
second per M bit (for example, AMD29DL323 can be programmed
by Dataman-48UXP within 80 seconds). An experienced operator
can program thousands of high-density chips per day.