Table of Contents
Advertisement
Next serial value
When serialization is active the panel displays the current serialization mode and
serialization number or label that will be used for the next device to be programmed.
Recent serial numbers used for each device are displayed in the table Site and
serialization status in the column Serialization.
Statistics
This panel contains information about the number of device operations processed and
actual count down status. For more details see Statistics dialog (menu Options /
Statistics).
Recently selected Device name
Manufacturer and name of any recently selected devices.
Recent Project name
Currently loaded project file name.
Checksum of data stored in the data buffer for the currently selected device.
Button Run... ( ... can be the operation name, for example Program, Verify, Erase)
Clicking on the button Run... will start the selected device operation for all connected
programmer sites. The button can only be used when no device operation is running on
any programmer site.
Button Stop
Clicking on the Stop button will stop executing the currently running device operation on
all connected programmer sites.
Menu File
File / Load project
This menu command opens the dialog 'Load project', where the user can choose from
which location the project file is to be loaded and load the selected project.
Two options are available:
1. Load project from [Projects] folder...
2. Load project from another location...
25
Advertisement
Table of Contents
