Table of Contents
Advertisement
Note: Menu Device operation options and <Alt+S> depend on the currently
selected device.
9.
Save project: click on the icon
description for the project etc.
You can also make a project on other DATAMAN programmers (DATAMAN-
48PRO2...). For more details see Help for PG4UW or "Dataman PRO series_manual".
The latest manual may be found at www.dataman.com.
Production mode
Note: External display, keyboard and mouse are not needed in this mode.
This part of the software is focused on the easy monitoring of high-volume production
operations via a graphical control unit with touch screen.
The user can control the following basic operations:
• load project file
• connect/disconnect programmer sites
• select desired device master operation (blank check, verify, program, erase)
• start/stop device operation on connected programmer sites
• set some advanced options to customize available settings, for example Automatic
YES! Function
• create Job report
• create Problem report
• copy project file(s) from external drive (for example from network drive, USB key
etc.) to the standalone's local [Projects] folder
• see the progress of device operation, including statistics information, serialization...
Step by step instruction
Starting the Stand-Alone multiprogramming system
1.
Check if the power switch on the back of the programmer, near power supply
connector is in position '0'.
2.
Plug the power cord into the programmer's power supply connector and turn on
the programmer using the power switch placed on the back of the programmer.
3.
When the built-in computer is turned on the operating system will start booting-
up, cooling fans should start to work, and the "Please Wait" screen should be
displayed on the graphical control unit.
4.
Loading of the operating system can take some time, normally no longer than 1
minute.
5.
After the operating system has successfully started, the Pg4uwMC control
program will start automatically. When the Pg4uwMC is ready to work the
"Welcome screen" is displayed on the graphical control unit.
6.
Click the OK button on the "Welcome" screen to continue. The main screen with
menus and Status panel should appear on the graphical control unit.
and select the destination folder, write a
20
Advertisement
Table of Contents
