Introduction - Dataman -848PRO2 User Manual

Introduction

DATAMAN-848PRO2 is extremely fast universal 8x 48-pindrive Stand-Alone
concurrent multiprogramming system designed for high volume production
programming with minimal operator effort. The chips are programmed at near
theoretical maximum programming speed.
Block scheme of DATAMAN-848PRO2
Windows XP Embedded
external display
graphics control unit
driven
keyboard
with touch screen
high performance PC
mouse
optional
site 1 site 2 site 3 site 4 site 5 site 6 site 7 site 8
DATAMAN-848PRO2 consists of eight independent isolated universal programming
modules, based on the DATAMAN-48PRO2 programmer hardware. Therefore
DATAMAN-848PRO2 sockets can run asynchronously (concurrent programming
mode). Each programming module starts programming at the moment the chip is
detected to be inserted in the socket properly - independently of the status of other
programming modules. This results in seven programming modules working while you
replace the programmed chip in the eighth.
Graphical control unit with touch screen provides basic control and easy monitoring of
the programming flow.
Modular construction of hardware - the programming modules work independently -
allows for continuing operation when a part of the circuit becomes inoperable. It also
makes service quick and easy.
Hands-free operation: asynchronous and concurrent operation allows a chip to begin
programming immediately upon insertion of a chip. The operator merely removes the
finished chip and inserts a new chip. Operator training is therefore minimized.
DATAMAN-848PRO2 supports all kinds and types of silicon technology found in today's
and tomorrows programmable devices without family specific modules. You can be sure
4