Table of Contents
Advertisement
HEADLIGHT REPLACEMENT
Remove Bulb
NOTICE: Save all hardware for reinstallation.
1.
Turn engine switch to OFF position and wait for all
moving parts to stop and for hot parts to cool.
2.
Disconnect spark plug wire from engine.
3.
Remove hardware securing headlight to dash panel.
See Figure 75.
See Figure 76.
4.
Remove headlight from dash panel.
5.
Disconnect wire harness from bulb.
6.
Turn bulb one-eighth turn counterclockwise and
remove from headlight housing. See Figure 77.
Figure 75
Figure 76
Install Bulb
IMPORTANT: DO NOT touch new bulb with bare hands;
wear gloves. Body oil on a headlight bulb can increase bulb
temperature and reduce life of the bulb.
1.
Install bulb into headlight housing and turn one-eighth
turn clockwise. See Service Parts on page 37.
2.
Connect bulb to wire harness.
3.
Reinstall headlight housing into dash panel and
secure with two tapping screws.
4.
Reconnect spark plug wire.
EN – 32
Figure 77
Advertisement
Table of Contents
