Dual-Handle Interlock Cam Replacement; Remove Interlock Cams - Ariens 926062 Service Manual

10. Rotate tractor to operating position, support
handlebars and reinstall brush attachment. See Install
Brush to Frame on page 8.
11. Fill fuel tank and reconnect spark plug wire.
DUAL-HANDLE INTERLOCK CAM
REPLACEMENT

Remove Interlock Cams

NOTICE: Save all hardware for reinstallation.
See Figure 70.
1. Disconnect spring from interlock bracket.
2. Remove two spring clips securing interlock cams to
camshafts.
1
4
1. Spring Clip
2. Interlock Cam
3. Spring
4. Interlock Bracket
EN – 30
2
3
Figure 70