Table of Contents
Advertisement
NOTICE: Interlock cams will fall from camshafts in next
step.
3.
Remove hardware retaining camshafts to clutch levers
and remove camshafts from interlock bracket. See
Figure 71.
4.
Remove cams.
Install Interlock Cams
IMPORTANT: Make sure nylon bushings are seated in
interlock bracket. See Figure 72.
1.
Reinstall right camshaft through interlock bracket and
secure to clutch lever with one tapping screw.
Figure 71
Figure 72
2.
Install interlock cam onto camshaft so flat edge is
positioned downward. Secure with spring clip. See
Figure 73.
3.
Position interlock cam inside interlock bracket and
align with left camshaft.
4.
Insert camshaft through cam.
5.
Secure camshaft to clutch lever with one tapping
screw.
See Figure 74.
6.
Rotate cam so flat edge is positioned upward and
secure with spring clip.
7.
Reconnect spring to interlock bracket.
8.
Check dual-handle interlock function. Refer to
Operator's Manual for test procedure.
IMPORTANT: If dual-handle interlock continues to
malfunction, see your Ariens dealer.
EN – 31
Figure 73
Figure 74
Advertisement
Table of Contents
