6
Brake Cluster Removal and Installation
6
15
2731
BRAKE CLUSTER INSTALLATION
1.
Install in reverse order of disassembly. Use new bow tie locking pins when installing brake cables.
CAUTION
• Before installing axle shaft, clean any residual oil from the exposed end of the axle tube and from
the oil seal area.
2.
Be sure bolts (11) and new lock nuts (10) are used to mount the brake assembly (Figure 6-17, Page 6-10).
3.
Tighten nuts to 17 ft·lb (23.0 N·m). If torquing the bolt heads, torque to 30 ft·lb (40.6 N·m).
4.
For electric vehicles: Install the axle shaft.
For gasoline vehicles: Install the wheel hub assembly. See Rear Hub Installation, Section 24, Page 24-4.
Page 6-10
2019 Precedent Villager 2 Maintenance and Service Manual
11
8
9
4
3
2
Figure 6-17 Self-adjusting Wheel Brake Assembly
WHEEL BRAKE ASSEMBLIES
10
1
7
13
5
7
6
12
14