ELECTRIC VEHICLE - BATTERY CHARGER
EXTERNAL CHARGER REPAIRS
See General Warnings on page 1-2.
WARNING
• Knowledge of battery charger wiring and component terminology is required before attempting any
repair (Figure 15-5, Page 15-8).
• Prior to servicing the charger, disconnect the DC plug from the vehicle charger receptacle and the
AC cord from the AC outlet.
NOTE: This charger has no internals to service or repair. It only has a few external repairs that can be performed.
If an internal component needs repair, the charger must be replaced.
2790
TERMINAL BLOCK COVER REMOVAL
1.
Disconnect DC cord (1) from vehicle.
2.
Disconnect AC cord (2) from AC outlet.
3.
Push in mounting tabs (Figure 15-9, Page 15-20) to release cover (3) from terminal block (4).
9
5
1
10
Figure 15-8 External High-Frequency Charger Components
2019 Precedent Villager 2 Maintenance and Service Manual
8
3
6
External Charger Repairs
7
4
11
Page 15-19
15