Table of Contents
Advertisement
Danger if the device falls
Inadequately dimensioned lifting rods are liable to bend or break. As a consequence, the
device can fall from the crane. This can result in death, serious injury or material damage.
● Use suitable lifting rods for transporting. The weight of the cabinet is indicated on the rating
NOTICE
Material damage to the drive when incorrectly lifted
If the transport unit is lifted incorrectly, this can damage the decorative trim, cabinet doors, or
fans.
● Protect the cabinet and protruding parts against damage.
● Always lift the transport units with the appropriate spreading devices or hoisting tackle.
Procedure
1. If there are several holes, select which holes to use based on the center of gravity.
2. Push the lifting bars through the holes.
3. Place the sling ropes on the lifting bars so they are close to the cabinet. Secure the ends of
4. To lift the transport unit, use single sling ropes or two ropes with a cross stitch. Attach the
5. Lift the cabinet. Avoid shifting the center of gravity or distorting or damaging the cabinet.
SINAMICS SM150 6SL3815-7NP41-0AA1
Operating Instructions Rev.201910281301 EXAMPLE
WARNING
plate.
Figure 4-3
Lifting bar label
the lifting bars using the splint.
Figure 4-4
Securing the lifting rods
crane rope to the lifting rods so it is close to the cabinet.
When suspended, the cabinet must be parallel to the ground.
Preparations for use
4.3 Transportation
79
Advertisement
Table of Contents
