Printer Setup Menu List; Menu Items - Datamax M-Class Mark II Operator's Manual

Printer Setup Menu List

The Printer Setup Menu List label, shown below, contains the printer's current values for each
menu item that can be modified via the front panel.
The Menu Item Numbers correspond to the item's position in the Menu List for selection when
pressing the
FEED
the BAUD RATE Menu Item press and hold the
and then release or for the TOF GAIN item hold
Menu Item
Numbers
Appendix C – Paper Menu Setup
button during the Printer Setup Procedure. For example to "Direct Select"
Values
1) DIRECT
2) EDGE
3) NO
4) NO
5) 127
6) 127
7) 9600
8) 8
9) STD
10) 100
11) 3
12) 12
13) 10
14) 0
15) 426
16) 64
17) 128
18) NO
19) 100
20) AUTO
21) DPL
22) STANDARD
23) 10
24) NO
25) NO
26) NO
button for 7 flashes of the
FEED
for 12 flashes, etc.
FEED
Menu
Items
= MEDIA TYPE
= SENSOR TYPE
= PRESENT SENSOR
= CUTTER EQUIPPED
= SOP ADJUST, 0.005 in.
= PRESENT ADJUST, 0.005 in.
= BAUD RATE, bps
= DATA BITS
= CONTROL CODES
= CONT FORM LENGTH, 0.01 in.
= OOS MAXVOLT, 0.1 Volts
= TOF GAIN
= TOF DELTA, 0.1 Volts
= TOF LOW, 0.1 Volts
= LABEL WIDTH, 0.01 in.
= SCALABLE FONT, 4KB
= INTERNAL MODULE, 4KB
= LABEL ALIGNMENT
= ALIGNMENT LENGTH, 0.01 in.
= OPTION CONTROL
= INPUT MODE
= DPL EMULATION
= HEAT
= EXACT TIME
= GPIO
= NO REPRINT
light
ERROR
76