Approved Media - Datamax M-Class Mark II Operator's Manual

Approved Media

To achieve optimum print quality and maximum printhead life, Datamax-O'Neil specifies the use of
Datamax-O'Neil brand media and ribbons. These supplies are specially formulated for use in our
printers; use of non-Datamax-O'Neil supplies may affect the print quality, performance, and life of
the printer or its components.
For a current list of approved media and ribbons for use in direct thermal and thermal transfer
applications, please contact a Media Representative at (407) 523-5650.
Designator
A label width
B liner width
C gap (or notch) between labels
D label length
E media thickness
F notch opening width
G distance from the media's edge to the
media sensor aperture (left justified)
H reflective (black) mark width
I distance between reflective marks
J reflective mark length
K label repeat distance
[1]
Units of measure given in inches.
[2]
The reflective (black) mark must be carbon based, placed on the backside of the stock, and
the reflectance shall be less than 10% at wavelengths of 950 and 640 nm.
[3]
The maximum allowable length of the combined label and gap (or mark) measurement cannot
exceed 99.99 inches.
Appendix A – Specifications
Side View Top View
G
F
I
J
E
Media Dimensions
Description
[3]
[3]
[2]
[3]
[3]
[3]
H
D
K
A
C
B
[1]
Maximum
4.65
4.65
.25
–
.0100
.500
2.250
4.65
–
–
–
[1]
Minimum
.75
.75
.100
.250
.0025
.200
.200
.500
.500
.100
.350
71