Front Panel (Display-Equipped Models) - Datamax M-Class Mark II Operator's Manual

3 . 2 F r o n t P a n
3 . 2 F r o n t P a n
3 . 2 F r o n t P a n
The Control Panel is an event-driven interface composed of a graphic display and keyboard. In
addition to providing current printer information, the mode-dependent panel allows the items in
the Main Display Area and the keyboard functions to change as operational events require.
Icons & Indicators
The icons are graphics that appear in the 'Printer Status Line' area of the display. Three LED
indicators are located above the display. Both provide real-time operational information as defined
below:
Item
/
Chapter 3 - Printer Operation
e l
e l
e l
( D i s p l a y - E q u i p p e d
p e
( D i s p l a y - E q u i p
( D i s p l a y - E q u i p p e
Definition
A USB Host or SD device (memory drive or keyboard) has been detected
RFID is installed
A wired LAN connection has been detected
WLAN is enabled and the printer s NOT associated with a WLAN Access
Point
Printer WLAN is associated with an WLAN Access Point
WLAN is in ADHOC mode
DPL mode selected
LINE mode selected
PL-Z mode selected
Enhanced Display Mode – Applies a "zoom" feature for easier viewing. From
the Ready screen, press and hold the down button to toggle on and off.
The printer is receiving data
The printer is stopped or paused
A Fault condition has been detected. For a listing of possible messages,
see Section 6.2
P r i n t e r s )
d P r i n t e r s )
d P r i n t e r s )
15