Printer Operation; Front Panel (Non-Display Models) - Datamax M-Class Mark II Operator's Manual

3
3
3
P
P
P
3 . 1 F r o n t P a n
3 . 1 F r o n t P a n
3 . 1 F r o n t P a n
The Front Panel consists of three indicator lights and three
function buttons. The functions of these lights and controls
are listed in the following sections.
Non-display printers can be configured using the DMXConfig
Utility (see Section 3.4). The printer can also be configured
using the Paper Menu Setup, (see Appendix C) for users that
do not have a host connection available.
3.1.1 Lights
(Normal power-up)
Normal Mode
STOP
ERROR
READY
Both the
 READY
Chapter 3 - Printer Operation
r i n t e r
r i n t e r
r i n t e r
e l
e l
e l
( N o n - D i s p l a y P r i
( N o n - D i s p l a y P r i
( N o n - D i s p l a y P r i
Solid On: Indicates the printer is in the 'Paused' state
Flashing: (When using the Peel & Present Option) Indicates
a label is presented to the operator.
Indicates a top of form or mechanical error has occurred
Solid On: Indicates the printer is on and ready for printing
Flashing: Indicates the printer is receiving data from the host
and
STOP
O p e r
O p e r
O p e r
n t e r s )
n t e r s )
n t e r s )
Lights will be on during power-up initialization.
a t i o n
a t i o n
a t i o n
13