Printer Setup Menu List - Datamax Mark II Operator's Manual

B.2.1 Printer Setup Menu List
The Printer Setup Menu List label, shown below, contains the printer's current values for each menu item that
can be modified via the front panel (see Section B.2.2 for detailed item descriptions).
The Menu Item Numbers correspond to the item's position in the Menu List for selection when pressing the
Button during the Printer Setup Procedure. For example: to directly select the BAUD RATE Menu Item, press
Button for 9 flashes of the Fault Light, or for LABEL LENGTH hold
and hold the
F2
Menu Item
Numbers

When using narrow media, the Menu Items column may be truncated.
Appendix B – Internal Menu
Values
1) DIRECT THERMAL
2) GAP
3) AUTO
4) AUTO
5) IMPERIAL
6) 0
7) 0
8) 0
9) 9600 BPS
10) 8
11) STANDARD CODES
12) 100
13) 426
14) 511
15) 1024
16) AUTO
17) NO
18) 1
19) DPL
20) STANDARD
21) 10
22) MULTIPLE LABEL
23) STANDARD
24) ENABLED
25) ENABLED
F2
Menu
Items
= MEDIA TYPE
= SENSOR TYPE
= PRESENT SENSOR
= CUTTER
=UNITS OF MEASURE
= ROW ADJUST
= COLUMN ADJUST
= PRESENT ADJUST
= BAUD RATE bps
= DATA BITS.
= CONTROL CODES
= LABE LENGTH .01 in
= LABEL WIDTH .01 in
= SCALEABLE FONT CACHE 1KB
= INTERNAL MODULE
= PRESENT DISTANCE
= LABEL ALIGNMENT
= ALIGNMENT LENGTH .01 in
= INPIT MODE
= DPL EMULATION
= HEAT
= IMAGING MODE
= FAULT HANDLING
= HEAT COMMAND
= SPEED COMMANDS
F2
for 12 flashes, etc.
41