Network Provider At The External Analogue Port - Auerswald COMpact 4000 Instructions Manual

Pbx for internet/isdn/analogue telephony
Hide thumbs Also See for COMpact 4000:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 27

Network Provider at the External Analogue Port

Warning: Voltages that run through the connection socket of the network provider
can cause life-threatening electric shocks.
• Do not connect the PBX until the casing on the connection socket of the network provider
is closed again.
Connection possibilities:
• Public analogue telephone network across Europe
• Analogue GSM gateway
If the analogue connection has a greater distance to the PBX, a
cable with a wall socket at the terminal clamps of the external
analogue port must be laid fixed. Connect the devices with the
RJ-11/RJ-11 connection cable included in the scope of delivery.
Within Germany, you additionally require the RJ-11/TAE-F
adapter.
Internet and VoIP Terminals as well as PC at the Ethernet Port
Connection possibilities:
• PC
• Internet (VoIP accounts with one or more VoIP phone numbers similar to the PMTP
connection on ISDN and VoIP accounts with an extensions block similar to the PBX
connection under ISDN, based on the SIP-DDI feature (also known as SIP trunking)
• COMfortel 1400 IP/2600 IP/3600 IP system telephones
• COMfortel 3200/3500 system telephones (firmware version 1.8E or later)
• IP DECT single- and multicell servers COMfortel WS-400 IP and COMfortel WS-650 IP for
COMfortel M-100, COMfortel M-200/210 and COMfortel M-300/310 DECT handsets.
• Standard VoIP telephone (SIP), e. g. COMfortel 1200 IP
• Softphones (SIP)
• IP switch relays (e.g. NETIO 230B, WebRelay (identical to Keil), Energenie EG-PM2-Lan,
Philips hue)
• IP door terminals (e.g. Telecom Behnke Serie 20 IP, Baudisch SIP door terminal Maxi,
TCS FBI 6101, ELCOM LBM-300)
Requirements:
• For Internet access: Broadband Internet connection (e. g. DSL router, TV cable router)
• Existing network (LAN) or single switch (for VoIP terminals) with a data transmission rate
of 100 Mbit/s
Notes: For VoIP data communication in combination with the transmission of limited
amounts of data, a data transmission rate in the LAN of 10 Mbps is sufficient under certain
circumstances. For VoIP data communication in combination with the transmission of large
COMpact 4000 - Instructions V05 10/2018
Installation
external analogue port
RJ-11 wall socket
45

Advertisement

Table of Contents
loading

Table of Contents