Port Configuration - D-Link DES-3250TG User Manual

Port Configuration

Click the Port Configuration link in the Configuration menu:
D-Link DES-3250TG Standalone Layer 2 Switch
<Disabled>
Web Status
<Disabled>
Link Aggregation
Algorithm <Mac
Source>
RMON Status
<Disabled>
802.1x Status
Asymetric VLAN
<Disabled>
Syslog Global State
<Disabled>
Telnet. Toggle Disabled to Enabled.
To enable the Web status, toggle
Disabled to Enabled.
The Link Aggregation Algorithm can be
set to one of the following: IP Src &
Dest, IP Destination, IP Source, Mac Src
& Dest, Mac Destination, or Mac Source.
To enable RMON capability, toggle
Disabled to Enabled.
To enable 802.1x port control access
on a global basis, toggle Disabled to
Enabled.
To enable Asymetric VLANs, toggle to
Enabled. Please note that when the
user sets Asymetric
Disabled, then the
VLAN setting is restored.
To enable Syslog Global State, toggle to
Enabled.
45
VLANs to
factory default