Save Changes; Reboot Services - D-Link DES-3250TG User Manual

D-Link DES-3250TG Standalone Layer 2 Switch
Figure 6- 92. Ping Test window
The Infinite times checkbox, in the Repeat Pinging for section, tells PING to keep sending data
packets to the specified IP address until the program is stopped.

Save Changes

The DES-3250TG has two levels of memory, normal RAM and non-volatile or NV-RAM.
To retain any configuration changes permanently, highlight Save Changes on the Maintenance menu.
The following screen will appear to verify that your new settings have been saved to NV-RAM.
Figure 6- 93. Save Configuration window
Once the switch configuration settings have been saved to NV-RAM, they become the default settings for
the switch. These settings will be used every time the switch is rebooted.

Reboot Services

The following folder contains windows that allow you to either Reboot, Reset, Reset System, or Reset
Config. See the on-screen instructions for the differences among each option.
Note that all changes are kept in normal memory. If a user does not save the result into NV-RAM with
the Save Changes function, the switch will recover all the settings the last user configured after the
switch is rebooted.
118