Vlans - D-Link DES-3250TG User Manual

VLANs

Static VLAN Entry
To create a new 802.1Q VLAN:
The VLAN menu adds an entry to edit the VLAN definitions and to configure the port settings for IEEE
802.1Q VLAN support. Go to the Configuration menu, select the VLANs folder, and click Static VLAN
Entry to open the following window:
To delete an existing 802.1Q VLAN, click the corresponding click-box to the left of the VLAN you want to
delete from the switch and then click the Delete button.
To create a new 802.1Q VLAN, click the Add button:
D-Link DES-3250TG Standalone Layer 2 Switch
Port
None
Egress
Figure 6- 24. 802.1Q Static VLANs window
Figure 6- 25. (Add) 802.1Q Static VLAN window
Select the port number on which the
MAC address entered above resides.
Specifies the port as being none.
Specifies the port as being a source
of multicast packets originating from
the MAC address specified above.
60