D-Link DES-3250TG User Manual page 102

SNMP View Table
The SNMP View Table is used to assign views to community strings that define which MIB objects can
be accessed by an SNMP manager.
To delete an existing SNMP View Table entry, click the selection button in the Delete column on the far
right that corresponds to the port you want to configure. To create a new entry, click the Add button, a
separate window will appear.
D-Link DES-3250TG Standalone Layer 2 Switch
checked configure also:
Auth-Protocol
If Encryption (V3 only) is
checked configure also:
Priv-Protocol
Figure 6- 59. SNMP View Table window
In the Space provided, type an
alphanumeric sting of between 8 and
20 characters that will be used to
authorize the agent
packets for the host.
From the pull-down menu select:
MD5 − To specify that the HMAC-
MD5-96 authentication level will be
used.
SHA − To specify that the HMAC-
SHA-96 authentication level will be
used.
In the Space provided, type an
alphanumeric string of between 8
and 16 characters that will be used
to encrypt the contents of messages
the host sends to the agent.
94
to receive