D-Link DES-3250TG User Manual page 104

To display the current SNMP Group Table Configuration, click the Group Name in the first column of
the SNMP Group Table window.
The following parameters are used in the SNMP Group Table windows:
D-Link DES-3250TG Standalone Layer 2 Switch
Figure 6- 62. SNMP Group Table Configuration window
Figure 6- 63. SNMP Group Table Display window
Parameter
Group Name
Read View Name
Write View Name
Notify View Name
Security Model
Description
Type an alphanumeric string of up to
32 characters. This
identify the new SNMP group of
SNMP users.
This name is used to specify the
SNMP group created can request
SNMP messages.
Specify a SNMP group name for
users that are allowed SNMP write
privileges to the
agent.
Specify a SNMP group name for
users that can receive SNMP trap
messages generated by the switch's
SNMP agent.
Use the pull-down menu to select the
SNMP version. Select one of the
following:
SNMPv1 – Specifies that SNMP
96
is used to
switch's SNMP