D-Link DES-3250TG User Manual page 110

The following fields can be set:
D-Link DES-3250TG Standalone Layer 2 Switch
Figure 6- 70. Rx Packets Analysis window (table for Bytes and Packets)
Parameter
Time Interval [1s ]
Record Number
[200]
Bytes
Packets
Show/Hide
Clear
View Table
View Line Chart
Description
Select the desired setting between 1s
and 60s, where
seconds. The default value is one
second.
Select number of times the Switch
will be polled between 20 and 200.
The default value is 20.
Counts the number of bytes received
on the port.
Counts the number
received on the port.
Check whether to display Bytes and
Packets.
Clicking this button
statistics counters on this window.
Clicking this button instructs the
Switch to display a table rather than
a line graph.
Clicking this button instructs the
Switch to display a line graph rather
than a table.
102
"s" stands for
of packets
clears all