Port Mirroring - D-Link DES-3250TG User Manual

Mini-GBIC plug-in module is used, the options are Auto and 1000/Full. Otherwise, the two 1000BASE-T
Copper ports offer the same five choices for ports 1-48, plus a 1000/Full option.
Please note that although the two front panel modules can be used simultaneously, the ports must be
different. For example, if port 50x is used on the Mini GBIC module, port 50x is not available on the
1000BASE-T module. In addition, the fiber port will always be the highest priority.
The following fields can be set:
Parameter

Port Mirroring

To configure a port for port mirroring:
Click Port Mirroring on the Configuration menu:
D-Link DES-3250TG Standalone Layer 2 Switch
From and To
State <Enabled>
Speed/Duplex
<Auto>
Description
Enter the desired range of ports to be
configured in these fields.
Toggle the State field to either enable
or disable a given port.
Toggle the Speed/Duplex field to either
select the speed and duplex/half-
duplex state of the port. Auto – auto-
negotiation between 10 and 100 Mbps
devices, full- or half-duplex. The Auto
setting allows the port to automatically
determine the fastest settings the
device the port is connected to can
handle, and then to use those settings.
The other options
100M/Half, 10M/Full, and 10M/Half.
There is no automatic adjustment of
port settings with any option other
than Auto.
47
are 100M/Full,