Advanced Settings - D-Link DES-3250TG User Manual

You can also enter the name of the System, its location, and the name and telephone number of the
System Administrator. It is recommended that the person responsible for the maintenance of the
network system that this switch is installed on be listed here.

Advanced Settings

Click Advanced Settings on the Configuration menu:
The following fields can be set:
D-Link DES-3250TG Standalone Layer 2 Switch
Figure 6- 10. Switch Information (Advanced Settings) window
Parameter
serial_port auto
logout time <10
minutes>
MAC Address
Aging Time <300>
IGMP Snooping
<Disabled>
GVRP Status
<Disabled>
Telnet Status
Description
Set the age out timer for the serial port
to 2 minutes, 5 minutes, 10 minutes, 15
minutes, or Never.
The MAC Address Aging Time specifies
the length of time a learned MAC
Address will remain in the forwarding
table without being accessed (that is,
how long a learned MAC Address is
allowed to remain idle). The Aging Time
can be set to any value between 10
and 1,000,000 seconds.
IGMP Snooping allows the switch to
read the Multicast Group IP address
and the corresponding MAC address
from IGMP packets that pass through
the switch. It can be enabled globally
by toggling Disabled to Enabled.
To enable GVRP on the switch globally,
toggle Disabled to Enabled.
The Switch can be accessed using
44