The 802.1Q Port Settings window, shown below, allows you to determine whether the switch will share
its VLAN configuration information with other GVRP (GARP VLAN Registration Protocol)-enabled
switches. In addition, Ingress can be used to limit traffic by filtering incoming packets whose PVID does
not match the PVID of the port.
D-Link DES-3250TG Standalone Layer 2 Switch
Egress
Forbidden
specified as None. When an untagged
packet is transmitted by the port, the
packet header remains unchanged.
When a tagged packet exits the port,
the tag is stripped and the packet is
changed to an untagged packet.
Egress Member - specifies the port
as being a static member of the
VLAN. Egress Member Ports are
ports that will be transmitting traffic
for the VLAN. These ports can be
either tagged or untagged.
Forbidden Non-Member - specifies
the port as not being a member of
the VLAN and that the port is
forbidden from becoming a member
of the VLAN dynamically.
62