D-Link DES-3250TG User Manual page 67

Multicast Forwarding
Multicast MAC addresses can be statically entered into the switch's MAC Address Forwarding Table.
These addresses will never age out.
To enter a Multicast MAC address into the switch's forwarding table, click on the Forwarding
Filtering folder on the Configuration menu and then click Multicast Forwarding:
To add a new multicast MAC address to the switch's forwarding table, click the Add button:
The following fields can be set:
Parameter
D-Link DES-3250TG Standalone Layer 2 Switch
Allowed to Go Port
Figure 6- 22. Static Multicast Forwarding Settings window
Figure 6- 23. Setup Static Multicast Forwarding Table window
VID
Multicast MAC
Address
Displays the currently selected MAC
address when editing.
Allows the selection
number on which the MAC address
entered above resides.
Description
Allows the entry of the VLAN ID of
the VLAN the MAC address below is
a member of.
Allows the entry of the multicast
MAC address of an end station that
will be entered into the switch's
static forwarding table.
59
of the port