D-Link DES-3250TG User Manual page 124

D-Link DES-3250TG Standalone Layer 2 Switch
Figure 6- 87. Download Firmware from Server window
Enter the IP address of the TFTP server in the Server IP Address field.
The TFTP server must be on the same IP subnet as the switch.
Enter the path and the filename to the firmware file on the TFTP server.
The TFTP server must be running TFTP server software to perform the file transfer. TFTP server software
is a part of many network management software packages – such as NetSight, or can be obtained as a
separate program.
Use the Save Changes from the Maintenance menu to enter the address into NV-RAM.
Click Start to initiate the file transfer.
Download Settings from TFTP Server
To download a configuration file for the switch's, click on the Maintenance folder and then the
TFTP Services folder and finally click on the Download Settings from TFTP Server link:
Figure 6- 88. Download Settings from TFTP Server window
Enter the IP address of the TFTP server and specify the location of the switch configuration file on the
TFTP server and click Start to initiate the file transfer.
Upload Settings to TFTP Server
To download a configuration file for the switch, click on the Maintenance menu and then the
TFTP Services folder and finally click on the Upload Settings to TFTP Server link:
Figure 6- 89. Upload Settings to TFTP Server window
Enter the IP address of the TFTP server and the path and filename of the settings file on the TFTP server
and click Start to initiate the file transfer.
116