D-Link DES-3250TG User Manual page 94

Port Capability Settings
Existing 802.1x port settings are displayed and can be configured using the window below.
Click Port Capability Settings on the PAE Access Entity folder on the Configuration menu to
open the 802.1X Capability Settings window:
D-Link DES-3250TG Standalone Layer 2 Switch
Ctl Stat
PortControl
TxPeriod
QuietPeriod
SuppTimeout
ServerTimeout
MaxReq
ReAuthPeriod
ReAuth/
ReAuth Enabled
unauthorized will exert control over
communication in both receiving and
transmitting directions, or just the
receiving direction.
This displays whether a controlled
Port that is unauthorized will exert
control over communication in both
receiving and
directions, or just
direction.
From the pull-down menu, select
forceAuthorized, forceUnauthorized or
auto − Force Authorized forces the
Authenticator of the port to become
Authorized. Force
forces the port
Unauthorized.
Select the time to wait for a response
from a supplicant (user) to send EAP
Request/Identity packets.
Select the time interval between
authentication failure and the start
of a new authentication attempt.
Select the time to wait for a response
from a supplicant (user) for all EAP
packets, except
Request/Identity packets.
Select the length of time to wait for a
response from a Radius server.
Select the maximum number of
times to retry sending packets to the
supplicant.
Select the time interval between
successive re-authentications.
Enable or disable re-authentication.
86
transmitting
the receiving
Unauthorized
to become
for the