Pae Access Entity - D-Link DES-3250TG User Manual

D-Link DES-3250TG Standalone Layer 2 Switch
Figure 6- 46. System Log Server window
Enter the desired system log server information and then click Apply to let your changes take effect.

PAE Access Entity

The DES-3250TG implements the server-side of the IEEE 802.1x Port-based Network Access Control.
This mechanism is intended to allow only authorized users, or other network devices, access to network
resources by establishing criteria for each port on the switch that a user or network device must meet
before allowing that port to forward or receive frames.
IEEE 802.1x operation must be enabled on the switch before it will function. This is done using the
802.1x Status control on the Switch Information (Advanced Settings) window. 802.1x settings can be
configured before it is enabled switch-wide.
Configure Authenticator
Existing 802.1x port settings are displayed and can be configured using the window below.
Click Configure Authenticator on the PAE Access Entity folder on the Configuration menu to
open the 802.1X Authenticator Settings window:
84