D-Link DES-3250TG User Manual page 118
Standalone layer 2 switch
Hide thumbs
Also See for DES-3250TG:
- Command line interface reference manual (322 pages) ,
- User manual (244 pages) ,
- Reference manual (204 pages)
Table of Contents
Advertisement
The following fields can be set:
D-Link DES-3250TG Standalone Layer 2 Switch
Figure 6- 80. Rx Size Analysis window (table)
Parameter
Time Interval [1s ]
Record
Number
[200]
64
65-127
128-255
256-511
Description
Select the desired setting between 1s
and
60s,
where
seconds. The default value is one
second.
Select number of times the Switch
will be polled between 20 and 200.
The default value is 20.
The
total
number
(including bad packets) received that
were 64 octets in length (excluding
framing
bits
but
octets).
The
total
number
(including bad packets) received that
were between 65 and 127 octets in
length inclusive (excluding framing
bits but including FCS octets).
The
total
number
(including bad packets) received that
were between 128 and 255 octets in
length inclusive (excluding framing
bits but including FCS octets).
The
total
number
(including bad packets) received that
were between 256 and 511 octets in
length inclusive (excluding framing
bits but including FCS octets).
110
"s"
stands
for
of
packets
including
FCS
of
packets
of
packets
of
packets
Advertisement
Table of Contents
