Lacp - D-Link DES-3250TG User Manual

D-Link DES-3250TG Standalone Layer 2 Switch
port 5 will only be forwarded to ports 5 to 8. Packets to port 9, then, will be dropped. Click Apply to let
your changes take effect.

LACP

The DES-3250TG supports Link Aggregation Control Protocol. LACP allows you to bundle several
physical ports together to form one logical port. After the LACP negotiation, these candidates for
trunking ports can be trunked as a logical port. If any one of the connected port pairs does not have
LACP capability, these two ports will stand as regular ports until the LACP negotiation is successfully
completed. Like the traditional port trunking explained earlier in this manual, the member ports of an
LACP trunk group can only be from a trunk with a peer LACP trunk group.
Link Aggregation
Figure 6- 37. Port Link Aggregation Group window
Click Add to add an entry to the table in the bottom part of this window.
Figure 6- 38. Link Aggregation Settings window
Enter the desired LACP settings on this window and click Apply to let your changes take effect.
77